Sesebelisoa sa ho lekola Mobu trimble M3 Total Station
Trimble Total Station | |
M3 | |
Sebonela-hōle | |
Bolelele ba tube | 125 mm (4.91 in.) |
Kgodiso | 30 X |
Bophara bo sebetsang ba sepheo | 40 mm (1.57 in.) |
EDM 45 mm (1.77 in.) | |
Setšoantšo | E eme |
Sebaka sa pono | 1°20′ |
Matla a ho rarolla | 3.0" |
Bohole ba ho tsepamisa maikutlo | 1.5 m ho ya ho infinity (4.92 ft ho ya ho infinity) |
Lekhalo la litekanyo | |
Libaka tse khuts'oane ho feta 1.5 m (4.92 ft) li ke ke tsa lekanyetsoa ka EDM ena.Mekhahlelo ea tekanyo e se nang moholi, e bonahalang ho feta 40 km (25 miles) | |
Mokhoa oa Prism | |
Letlapa la reflector (5 cm x 5 cm) | 270 m (886 ft) |
Prism e tloaelehileng (1P) | 3,000 m (9,840 ft) |
Reflectorless mode | |
Sepheo sa litšupiso | 300 m (984 ft) |
• Sepheo ha sea lokela ho fumana letsatsi le tobileng. | |
•“Reference target” e bolela ntho e tšoeu, e bonahatsang haholo. | |
(KGC90%) | |
• Lekhalo le holimo la litekanyo tsa DR 1” le DR 2” ke 500m ho | |
mokhoa o se nang khanya. | |
Ho nepahala ha sebaka | |
Mokhoa o nepahetseng | |
Prism | ± (2 + 2 ppm × D) limilimithara |
Reflectorless | ± (3 + 2 ppm × D) limilimithara |
Mokhoa o tloaelehileng | |
Prism | ± (10 + 5 ppm × D) limilimithara |
Reflectorless | ± (10 + 5 ppm × D) limilimithara |
Mekhahlelo ea ho lekanya | |
Mekhahlelo ea ho lekanya e ka fapana ho ea ka sebaka se lekanyang kapa maemo a leholimo. | |
Bakeng sa tekanyo ea pele, ho ka nka metsotsoana e seng mekae hape. | |
Mokhoa o nepahetseng | |
Prism | 1.6 metsotsoana. |
Reflectorless | 2.1 metsotsoana. |
Mokhoa o tloaelehileng | |
Prism | 1.2 metsotsoana. |
Reflectorless | 1.2 metsotsoana. |
Tokiso ea prism offset | -999 limilimithara ho isa +999 limilimithara (1 mm mohato) |
Tekanyo ya kgutlo | |
Mokhoa oa ho bala | Encoder e felletseng |
Ho bala ha diametric ho HA/VA | |
Bonyane keketso ea ponahatso | |
360° | 1"/5"/10″ |
400G | 0.2 mgon/1 mgon/2 mgon |
MIL6400 | 0.005 MIL/0.02 MIL/0.05 MIL |
Sensor e sekame | |
Mokhoa | Ho lemoha ha mokelikeli-motlakase (Dual axis) |
Matšeliso a fapaneng | ±3′ |
Sekoti sa tangent | Friction clutch, motsamao o sa feleng o motle |
Tribrach | Detachable |
Boemo | |
Boemo ba elektronike | E hlahisitsoe ho LCD |
Vial ea boemo bo chitja | Sensitivity 10′/2 mm |
Sekhahla sa laser | |
Bolelele ba maqhubu | 635 nm |
Sehlopha sa laser | Sehlopha sa 2 |
Ho tsepamisa maikutlo | ∞ |
Laser bophara | Hoo e ka bang.2 mm |
Pontsho le letlapa la dikonopo | |
Pontšo ea sefahleho sa 1 | QVGA, mmala o monyenyane oa 16, TFT LCD, backlit (320 x 240 pixel) |
Pontšo ea sefahleho 2 | LCD e khanyang ka morao (128 x 64 pixels) |
Sefahleho sa 1 linotlolo | 22 linotlolo |
Sefahleho 2 linotlolo | 4 linotlolo |
Lihokelo seletsa | |
Lipuisano | |
RS-232C | Sekhahla se phahameng sa baud 38400 bps asynchronous |
USB Host le Client | |
Sehlopha sa 2 Bluetooth® 2.0 EDR+ | |
Matla a kenang ka ntle a phepelo ea motlakase | 4,5 V ho 5,2 V DC |
Matla | |
Matla a tsoang | 3.8 V DC e ka nchafatsoang |
Nako ea ts'ebetso e tsoelang pele | |
Tekanyo e tswellang ya sebaka/ekele | hoo e ka bang lihora tse 12 |
Tekanyo ea sebaka/ekele metsotsoana e meng le e meng e 30 | hoo e ka bang lihora tse 26 |
Tekanyo e tsoelang pele ea angle | hoo e ka bang lihora tse 28 |
E lekoa ka 25 °C (mocheso o tloaelehileng).Linako tsa ts'ebetso li ka fapana ho latela boemo le ho senyeha ha betri. | |
Ts'ebetso ea tikoloho | |
Boemo ba mocheso o sebetsang | -20 °C ho ea ho +50 °C |
(–4 °F ho ea ho +122 °F) | |
Sebaka sa mocheso oa polokelo | -25 °C ho ea ho +60 °C |
(–13 °F ho ya ho +140 °F) | |
Litekanyo | |
Sehlopha se seholo | 149 mm W x 158.5 mm D x 308 mm H |
Ho jara mokotla | 470 mm W x 231 mm D x 350 mm H |
Boima ba 'mele | |
Setsi sa mantlha se se nang betri | 4.1kg (9.0 lbs) |
Betri | 0.1kg (0.2 lbs) |
Ho jara mokotla | 3.3 lik'hilograma (7.3 lbs) |
Charger le adaptara ea AC | 0.4 lik'hilograma (0.9 lbs) |
Tšireletso ea tikoloho | |
Tšireletso e thibelang metsi / lerōle | IP66 |